CONFIG UID: 1842839 C: NON / EUR STATUS: draft CODE: WQ87KJ
Equipment package
incl. pre-installed equipment package consisting of:
· Skimmer, incl. filter cartridge and skimmer basket
· Inlet jet 105, R 1 ½", 4 x 8 mm ball jet, V4A
· Winter plug
· Safety overflow WP133
· 1 x underwater LED spotlight 12V warm white with satin-finished trim and niche, incl. UWS mount, 4 x countersunk screw M5x12
· 1 x transformer 100VA and 1 plastic cable junction box (delivered separately)
· Skimmer, incl. filter cartridge and skimmer basket
· Inlet jet 105, R 1 ½", 4 x 8 mm ball jet, V4A
· Winter plug
· Safety overflow WP133
· 1 x underwater LED spotlight 12V warm white with satin-finished trim and niche, incl. UWS mount, 4 x countersunk screw M5x12
· 1 x transformer 100VA and 1 plastic cable junction box (delivered separately)
4 x vertical inlets
Due to the increased surface movement, dirt is more quickly driven towards the skimmer. The lighting can reflect objects in the surroundings through the moving water surface.
· Installed in the entry area
· Includes winter plug
· 4 x rubber plugs, 28/35 x 35 mm"
· Installed in the entry area
· Includes winter plug
· 4 x rubber plugs, 28/35 x 35 mm"
Spa-Massage-Pak
· 2 x Turbojet-Slimline massage nozzles with stainless steel cover for the lower back
· 4 x Microjet-Slimline massage nozzles for the shoulders and neck
· 1 x PN pneumatic switch with 5 m PN hose
· 2 x light grey suction fittings
· 1 x jet pump 230V with PN switch box (pump is either pre-installed or pre-installed in the optional pump shaft)
Note: PN pneumatic switch is omitted when using the automatic system with Spa Touch display
· 4 x Microjet-Slimline massage nozzles for the shoulders and neck
· 1 x PN pneumatic switch with 5 m PN hose
· 2 x light grey suction fittings
· 1 x jet pump 230V with PN switch box (pump is either pre-installed or pre-installed in the optional pump shaft)
Note: PN pneumatic switch is omitted when using the automatic system with Spa Touch display
CSIDE Air Bubble System
with pneumatic switch, white
The CSIDE air bubble system features bubble jets integrated into the seating area for a whirl massage.
The strong turbulence distributes fine air bubbles in the water and around the body, creating a gentle peeling effect. The tiny bubbles settle on the skin, supplying it with much-needed oxygen from the outside.
Larger air bubbles generate pulsating vibrations that are transmitted directly to the body, penetrating deep into the tissue layers. This significantly improves blood circulation, and with regular use, metabolic waste is removed from old inflammation sites, reducing dimples and waves in cellulite.
Partially pre-assembled delivery
Includes:
· 16 jets in 4 rows with stainless steel covers
· Pneumatic switch, white
· Pneumatic control box (230V, 4-6A, up to 2kW)
· Blower (230V, 900W)
The strong turbulence distributes fine air bubbles in the water and around the body, creating a gentle peeling effect. The tiny bubbles settle on the skin, supplying it with much-needed oxygen from the outside.
Larger air bubbles generate pulsating vibrations that are transmitted directly to the body, penetrating deep into the tissue layers. This significantly improves blood circulation, and with regular use, metabolic waste is removed from old inflammation sites, reducing dimples and waves in cellulite.
Partially pre-assembled delivery
Includes:
· 16 jets in 4 rows with stainless steel covers
· Pneumatic switch, white
· Pneumatic control box (230V, 4-6A, up to 2kW)
· Blower (230V, 900W)
Water Cascade "Maine"
Consisting of:
· 1 x water cascade made of V4A stainless steel
· 1 x jet pump 230V with PN switch box
· 1 x pneumatic switch with 5 m PN hose
· 2 x light grey suction fittings
(Pump is either pre-installed or pre-installed in the optional pump shaft)
Note: PN switch is omitted when using the automatic system with Spa Touch display
· 1 x water cascade made of V4A stainless steel
· 1 x jet pump 230V with PN switch box
· 1 x pneumatic switch with 5 m PN hose
· 2 x light grey suction fittings
(Pump is either pre-installed or pre-installed in the optional pump shaft)
Note: PN switch is omitted when using the automatic system with Spa Touch display
Water Cascade "Cube"
V4A stainless steel cascade with push button in the pool
· 1 x Water Cascade "CUBE", loose
· 1 x PN push button 107/1 V4A, mounted
· 1 x 10 m PN hose, loose
· Jet pump with PN control box
· 2 x Suction fittings with stainless steel cover, mounted
Note: The PN push button is omitted when using an automatic system with a SPA Touch display.
· 1 x PN push button 107/1 V4A, mounted
· 1 x 10 m PN hose, loose
· Jet pump with PN control box
· 2 x Suction fittings with stainless steel cover, mounted
Note: The PN push button is omitted when using an automatic system with a SPA Touch display.
Insulation
Energy conservation through jointless thermal insulation
with polyurethane spray foam
Self-supporting construction
Bubble plate
incl. 0.85 kW side channel compressor
Unit without gate valve, including side channel blower (0.85 kW; 230 V) with rubber-metal feet and electrical auxiliary unit (230 V) with contactor up to 2 kW (6-10 A).
Shallow water zone, 1m laminated
23 cm deep across the entire pool width with a flat bottom extending from the upper step of the stairs. This ensures that the shallow water zone is fully covered by the roller cover.
Shallow water zone, 1m laminated
23 cm deep across the entire pool width with a flat bottom extending from the upper step of the stairs. This ensures that the shallow water zone is fully covered by the roller cover.
Additional LED underwater spotlight
Light color warm white, satin-finished cover
With isolation transformer and second cable connection box (KU), version HT – wiring on-site.
Surcharge for 1x LED RGB light
Light color: RGB (coloured light), satin-finished cover
Control box with remote control and DMX control
1x cable connection box – version HT
1x cable connection box – version HT
Surcharge for 2 x LED RGB light
Light color: RGB (coloured light), satin-finished cover
Control box with remote control and DMX control
2x cable connection box – version HT
2x cable connection box – version HT
Technical package for half-year use
Technical unit with filter pump and bypass for a heat pump
Technical unit consisting of:
· Self-priming filter pump 230 V
· Bypass for optional air heat pump
· Filter pump control
· Connected load: 1 x 16 Ampere - 230V
· Footprint: 120 cm x 80 cm (length x width)
Note
This technical unit can be used for half-year operation. The pool is heated by the optional air heat pump. When the outside temperature is above 10°C, the water can be heated up to 28°C. The distance between the pool and the technical unit should not exceed 5 m. The unit can also be installed above water level.
· Self-priming filter pump 230 V
· Bypass for optional air heat pump
· Filter pump control
· Connected load: 1 x 16 Ampere - 230V
· Footprint: 120 cm x 80 cm (length x width)
Note
This technical unit can be used for half-year operation. The pool is heated by the optional air heat pump. When the outside temperature is above 10°C, the water can be heated up to 28°C. The distance between the pool and the technical unit should not exceed 5 m. The unit can also be installed above water level.
Air heat pump with 8.47 kW
For the heating of your C-SIDE with the half-year technology
Dimensions: 950 x 390 x 550 mm
Weight: approx. 49 kg
Hydraulic connection: adhesive screw connection d 50
Performance data:
· Heating capacity A 15°/W 26° = 6.4 kW
· Heating capacity A 26°/W 26° = 8.47 kW
· Cooling capacity approx. 6 kW
· Power consumption approx. 1.45 kW
· Current consumption nominal 7.2 A, fuse 16 A C (slow blow)
· Water flow rate >3 m³
· Pressure loss heat exchanger kPa = 3.2
· Noise level at 10/1 mtr. approx. 38/50 dB(A)
Functionality from an outdoor temperature of 10°C.
Weight: approx. 49 kg
Hydraulic connection: adhesive screw connection d 50
Performance data:
· Heating capacity A 15°/W 26° = 6.4 kW
· Heating capacity A 26°/W 26° = 8.47 kW
· Cooling capacity approx. 6 kW
· Power consumption approx. 1.45 kW
· Current consumption nominal 7.2 A, fuse 16 A C (slow blow)
· Water flow rate >3 m³
· Pressure loss heat exchanger kPa = 3.2
· Noise level at 10/1 mtr. approx. 38/50 dB(A)
Functionality from an outdoor temperature of 10°C.
Automatic technology with touch display
with frost protection, suitable for winter use
This technical unit is designed for the automatic year-round operation of a C-SIDE pool. The pool is heated by the electric heater. The distance between the pool and the technical unit should not exceed 5 m.
Technical unit, fully pre-assembled:
· Self-priming filter pump 230 V
· Pool control with SPA-Touch display and temperature monitoring
· Incl. IR remote control (SPA-Touch display is delivered separately)
· Electric heater 230 V, 1 x 3 kW / 1 x 2 kW
· Connected load: 2 x 16 Ampere
Note:
Max. water temperature of 32°C for Papyrus, Silver Grey, and Granicite Stone Grey
Max. water temperature of 38°C for Mosaic
Technical unit, fully pre-assembled:
· Self-priming filter pump 230 V
· Pool control with SPA-Touch display and temperature monitoring
· Incl. IR remote control (SPA-Touch display is delivered separately)
· Electric heater 230 V, 1 x 3 kW / 1 x 2 kW
· Connected load: 2 x 16 Ampere
Note:
Max. water temperature of 32°C for Papyrus, Silver Grey, and Granicite Stone Grey
Max. water temperature of 38°C for Mosaic
Air heat pump Clim8zone, heating capacity 6.3 kW
For heating your C-SIDE pool with the year-round system
Power supply: 220-240 V, 50 Hz
Power consumption (max): 1.3 kW
Nominal current: 4.4 A
Maximum current: 5.7 A
Mechanical specifications:
· Operating temperature: -10°C to 43°C
· Water resistance: IPX4
· Net weight: 54 kg
· Noise level at 1 m: 40-52 dB(A), variable in auto mode
Dimensions:
· Width: 794 mm
· Total height: 430 mm
· Depth: 474 mm
Power consumption (max): 1.3 kW
Nominal current: 4.4 A
Maximum current: 5.7 A
Mechanical specifications:
· Operating temperature: -10°C to 43°C
· Water resistance: IPX4
· Net weight: 54 kg
· Noise level at 1 m: 40-52 dB(A), variable in auto mode
Dimensions:
· Width: 794 mm
· Total height: 430 mm
· Depth: 474 mm
Bypass for heat pump "Clim8zone"
(Only compatible with the Clim8zone air heat pump)
Bypass for heat pump "Clim8zone"
(Only compatible with the Clim8zone air heat pump)
Terminal for touch display
Material: Stainless steel
Height: 1000 mm
Backplate and top plate screwed together
Including mounting material for the flange plate
Brushed surface
Backplate and top plate screwed together
Including mounting material for the flange plate
Brushed surface
Multi-Terminal
Outdoor shower and control unit combined
Terminal with a foldable lid for the SpaTouch display, side-mounted hand shower, and cold-water cross-handle faucet. Includes a fresh water tap station and a back panel prepared for a key switch.
Material: V2A stainless steel
Fittings: Brass, chrome-plated
Finish: Brushed
Height: 900 mm
Width: 200 mm
Mounting material: Included
Material: V2A stainless steel
Fittings: Brass, chrome-plated
Finish: Brushed
Height: 900 mm
Width: 200 mm
Mounting material: Included
Surface-mounted / flush-mounted box for touch display
Material: Stainless steel
Surcharge for sand filter system
Incl. wall-mounted skimmer with stainless steel faceplate, safety overflow, and stainless steel pre-filter basket
Consisting of:
1. Sand filter tank made of GFK D400
· With lateral 6-way valve
· With filter sand
· Service opening on top DN220
· Operating pressure: max. 2.5 bar
· Operating temperature: max. 40°C
2. Wall-mounted skimmer with stainless steel faceplate
· Flow rate / Qmax.: 6 m³/h
3. Lateral wall suction
This eliminates the need for cartridge filters in the pool.
For above-ground installation.
Not compatible with a technology box.
1. Sand filter tank made of GFK D400
· With lateral 6-way valve
· With filter sand
· Service opening on top DN220
· Operating pressure: max. 2.5 bar
· Operating temperature: max. 40°C
2. Wall-mounted skimmer with stainless steel faceplate
· Flow rate / Qmax.: 6 m³/h
3. Lateral wall suction
This eliminates the need for cartridge filters in the pool.
For above-ground installation.
Not compatible with a technology box.
Technology shaft XL
Outer dimensions: 1150 mm x 770 mm x 680 mm (LxWxH) incl. lid
Pre-assembled consisting of:
· Technique box XL incl. lid
· incl. inspection plate and shaft drain
· Cable gland and residual drainage
Note:
Only in combination with a technical unit.
Please note that the technology box must ALWAYS be installed below the water level.
· Technique box XL incl. lid
· incl. inspection plate and shaft drain
· Cable gland and residual drainage
Note:
Only in combination with a technical unit.
Please note that the technology box must ALWAYS be installed below the water level.
Technical shaft XXL with preparation for on-site dosing system
Outer dimensions: 1645 mm x 940 mm x 680 mm (LxWxH) incl. lid
Pre-assembled, consisting of:
· Technical shaft XXL incl. lid
· Incl. inspection plate and shaft drain
· Cable gland and residual drainage
Note:
Only in combination with a technical unit.
Please note that the technical shaft must ALWAYS be installed below the water level.
· Technical shaft XXL incl. lid
· Incl. inspection plate and shaft drain
· Cable gland and residual drainage
Note:
Only in combination with a technical unit.
Please note that the technical shaft must ALWAYS be installed below the water level.
Technique cabinet incl. lid, anthracite
Dimensions (WxDxH): 1.92 m x 1.00 m x 1.10 m
· External dimensions (WxDxH) incl. lid: approx. 1.92 m x 1.00 m x 1.10 m
· Space required to open the doors: approx. 1.00 m per door
· Interior dimensions (WxDxH): approx. 1.75 m x 0.85 m x 0.95 m
· Weight: approx. 75 kg
Large double-wing door and fold-up lid.
Frost-proof – suitable for year-round use.
· Space required to open the doors: approx. 1.00 m per door
· Interior dimensions (WxDxH): approx. 1.75 m x 0.85 m x 0.95 m
· Weight: approx. 75 kg
Large double-wing door and fold-up lid.
Frost-proof – suitable for year-round use.
Surcharge for additional electric heater 9 KW
Total power 3KW+9KW
Extension of the automatic system with touch display by a more powerful electric heater, allowing the pool to heat up faster.
Total connected load: 1 x 16 A 230V, 1 x 16 A 400V
Note:
For efficient pool heating, an insulating cover is essential.
Total connected load: 1 x 16 A 230V, 1 x 16 A 400V
Note:
For efficient pool heating, an insulating cover is essential.
SlideDeck
The lightweight aluminum construction impresses with its high stability and low profile.
Safety Kit, end position locking
Lockable with sliding bar
Automatic end position locking, lockable
SlideDeck drive
with remote control
Roller cover
Safety cover with roll-up mechanism
incl. hand crank and drive pin
colour: grey (RAL 7037)
colour: grey (RAL 7037)
Insulating cover
Grey
Robust and durable cover
Shape: Rectangular
Shape: Rectangular
Hardtop cover with sloped roof design
Hardtop cover with sloped roof design, including a protective cover (anthracite) against rain and dirt. RivieraTex is a 100% solution-dyed polyester fabric, PU-coated, breathable, and water-repellent.
Hardtop cover with sloped roof design
Hardtop cover with sloped roof design, including a protective cover (anthracite) against rain and dirt. RivieraTex is a 100% solution-dyed polyester fabric, PU-coated, breathable, and water-repellent.
Hardtop cover with sloped roof design
Hardtop cover with sloped roof design, including a protective cover (anthracite) against rain and dirt. RivieraTex is a 100% solution-dyed polyester fabric, PU-coated, breathable, and water-repellent.
Above-ground electric cover
anthracite
Electric above-ground cover, incl. control box and key switch for wall mounting.
Slats not included.
Slats not included.
Surcharge for above-ground seat bench cover
anthracite
Only in conjunction with the CSide above-ground cover.
*Not available for retrofitting*
*Not available for retrofitting*
Roller shutter slats for above-ground/in-ground covers
Made of 6 cm hollow chamber profiles
For use in the Poolbox
For use in the Poolbox
Roller shutter slats for above-ground/in-ground covers
Made of 6 cm hollow chamber profiles
For use in the Poolbox
For use in the Poolbox
Winter debris cover
Woven net to protect against leaves and coarse debris
Material: Polyester fabric
The cover protects against coarse debris.
Mounting instructions:
The cover is supplied with a double-stitched reinforced edge. Eyelets are inserted along the edge at a distance of 50 cm. The net cover is secured in retractable stainless steel floor anchors using elastic bands.
The cover protects against coarse debris.
Mounting instructions:
The cover is supplied with a double-stitched reinforced edge. Eyelets are inserted along the edge at a distance of 50 cm. The net cover is secured in retractable stainless steel floor anchors using elastic bands.
Coping stones granite
Grey
Coping stones for C-Side pool, with straight nose
Dimensions: 60x60x3/6 cm, flamed surface
Dimensions: 60x60x3/6 cm, flamed surface
Decorative tiles
Glass mosaic, factory-applied and grouted.
Series: "IRIDESCENT, ZEN, SPACE, COCKTAIL, or METAL"
Size: 25 x 25 mm
Epoxy material used as tile adhesive and joint filler.
Size: 25 x 25 mm
Epoxy material used as tile adhesive and joint filler.
Spare cartridge
Spare cartridge for cartridge filter
Bottom outlet, elbow 90°
(Only required if you want to empty the pool completely)
Red brass 1 1/2" F
Hair entrapment safety according to DIN 13451
Q-Max = 8.1 m³/h
Hair entrapment safety according to DIN 13451
Q-Max = 8.1 m³/h
Water care set HTH
Consisting of:
· 1 x Lovibond pool tester
· 1 x HTH pH-Plus 5 kg granules
· 1 x HTH Briquettes 7 g, 2.5 kg inorganic UN-1748, Calcium hypochlorite, mixture, dry, 5.1, III, (E)
· 1 x HTH pH Minus 5 kg granules
· 1 x HTH Alkanal 5 kg granules
· 1 x HTH Shock Powder (active chlorine content 75%) 1.6 kg
· 1 x Chlorine dispenser "Swim"
· 1 x Lovibond pool tester
· 1 x HTH pH-Plus 5 kg granules
· 1 x HTH Briquettes 7 g, 2.5 kg inorganic UN-1748, Calcium hypochlorite, mixture, dry, 5.1, III, (E)
· 1 x HTH pH Minus 5 kg granules
· 1 x HTH Alkanal 5 kg granules
· 1 x HTH Shock Powder (active chlorine content 75%) 1.6 kg
· 1 x Chlorine dispenser "Swim"
Manual pool vacuum
Blue (Portable)
An efficient and easy-to-use manual pool cleaner. Without the need for connections, the Spa Stick allows simple and effective cleaning of small areas. The collected dirt is retained in a separate filter container.
· Includes: Wall mount and two different suction nozzles
· Colour: Blue / Grey
· Material: Plastic
· Dimensions: 7 x 7 x 144 cm
· Weight: 1.2 kg
· Includes: Wall mount and two different suction nozzles
· Colour: Blue / Grey
· Material: Plastic
· Dimensions: 7 x 7 x 144 cm
· Weight: 1.2 kg
Electric pool vacuum cleaner
With submersible pump and telescopic pole
Self-priming pool vacuum with a powerful 7 m³ pump and large-capacity dirt bag.
· Suction head: 350 mm, made of thick-walled, rot- and chemical-resistant ABS
· Protective rubber profile: Prevents pool damage
· Rotating bristles on wheels: For cleaning hard-to-reach areas
· Height-adjustable strip brush: 270 mm, spring-mounted
· Repositionable rod holder: For cleaning both floors and walls
· Underwater cable: 18 m, equipped with an FI personal protection plug and TÜV certification
· Includes: Easy-to-clean dirt bag with zipper
· Power supply: 230V, 350W
· Suction head: 350 mm, made of thick-walled, rot- and chemical-resistant ABS
· Protective rubber profile: Prevents pool damage
· Rotating bristles on wheels: For cleaning hard-to-reach areas
· Height-adjustable strip brush: 270 mm, spring-mounted
· Repositionable rod holder: For cleaning both floors and walls
· Underwater cable: 18 m, equipped with an FI personal protection plug and TÜV certification
· Includes: Easy-to-clean dirt bag with zipper
· Power supply: 230V, 350W
Piping material
For connecting the pool to the technical shaft or heat pump
· 25 m adhesive hose, grey, 50 mm
· 4 x reducer elbow, 90°, 50 f/m
· 4 x elbow, 90°, 2 x socket, 50 x 50 f/m
· 1 x Tangit cleaner, 125 ml
· 1 x Griffon PVC glue WDF-05
· 4 x reducer elbow, 90°, 50 f/m
· 4 x elbow, 90°, 2 x socket, 50 x 50 f/m
· 1 x Tangit cleaner, 125 ml
· 1 x Griffon PVC glue WDF-05
Suction fitting d130
Only needed additionally if you want to connect a sand filter
· Straight wall duct
· Polished stainless steel
· Hair entrapment safety according to DIN 13451
· Qmax = 8.1 m³/h
· Polished stainless steel
· Hair entrapment safety according to DIN 13451
· Qmax = 8.1 m³/h
Inlet/overflow fitting, red brass, 1 1/2", straight
Colour: White plastic, top part: polished stainless steel
Mosaic surface: Polished stainless steel
Papyrus: White plastic
Silver grey/Granicite Stone grey: Black plastic
Papyrus: White plastic
Silver grey/Granicite Stone grey: Black plastic
Freight costs
Within Germany and the Benelux countries to the dealer
A forklift is required for unloading.
Surcharge for fixed date (day) delivery
Delivery to the dealer
If you require your C-SIDE pool to be delivered on a fixed date, please select this item. Our logistics team will contact you after order confirmation.
Surcharge for tarp-removable truck
Crane unloading on-site
The freight truck can be opened from the top, allowing an on-site crane to lift the pool from the truck.
Choose stairs:
CSIDE mini pools
<p><strong>Our versatile classics</strong></p>
Width
2.1 m
2.1 m
CSIDE RS Underfloor
<p><strong>Our new mini pool models with roller shutter shaft</strong></p>
Width
2.1 m
2.1 m
* incl. 0% VAT All illustrations include the equipment package and optional accessories. In the interest of technical progress, we reserve the right to make changes and improvements in production without prior notice. All offers are subject to change and non-binding. Prices without guarantee. The author expressly reserves the right to change, supplement or delete parts of the pages or the entire offer without separate announcement or to discontinue publication temporarily or permanently. Liability claims against the author, which refer to material or non-material damage, and which may be caused by the usage or non-usage of the information provided or, respectively, by the usage of any incorrect or incomplete information, are generally excluded. This disclaimer is to be regarded as part of the internet publication which you were referred from. If sections or individual terms of this statement are not legal or correct, the content or validity of the other parts remain uninfluenced by this fact.
Detail Titel
Detail Text
