CONFIG UID: 386808 C: AUT / EUR STATUS: completed CODE: JM9Q7B
Aqua Fun 4.0 als Healthstream angeordnet
Aqua Fun 4.0 Healthstream-Massagedüsen erlauben eine kraftvolle und gezielte
Körpermassage im Pool. Vier Massagedüsen sind auf unterschiedlichen Höhen
in der Beckenwand eingebaut für eine punktuelle Massage des Fuß- und
Wadenbereichs, der Oberschenkel und des unteren Rückens.
Körpermassage im Pool. Vier Massagedüsen sind auf unterschiedlichen Höhen
in der Beckenwand eingebaut für eine punktuelle Massage des Fuß- und
Wadenbereichs, der Oberschenkel und des unteren Rückens.
Luftsprudelplatte
im Beckenboden montiert
inklusive Seitenkanalgebläse (0,85 kW; 230 V) mit Gummimetallfüßen und EL-Zusatzgerät (230 V) mit Schütz bis 2 kW (6-10 A).
Luftsprudelsystem
CSIDE Luftsprudelsystem mit Sprudeldüsen in der Sitzbank für eine Whirlmassage.
Durch die starke Turbulenz werden feine Luftbläschen im Wasser und um den Körper verteilt, was zu einem milden Peelingeffekt führt. Die feinen Bläschen setzten sich auf der Haut fest, wodurch der Haut dringend benötigter Sauerstoff von außen zugeführt wird.
Größere Sprudelblasen erzeugen eine Klopfschwingung, die sich ungehindert auf den Körper überträgt und so bis in die tiefsten Gewebeschichten wirkt. Dadurch wird die Durchblutung massiv gesteigert und bei regelmäßiger Nutzung Schlackenstoffe an alten Entzündungsherden eliminiert und Dellen und Wellen bei Cellulite gemindert.
Beinhaltet:
-16 Düsen in 4 Reihen mit Edelstalblenden
- Gebläse (230V, 900W)
Achtung: Rohrschleife min. 30 cm über dem Wasserspiegel muss bauseits erstellt werden!
Durch die starke Turbulenz werden feine Luftbläschen im Wasser und um den Körper verteilt, was zu einem milden Peelingeffekt führt. Die feinen Bläschen setzten sich auf der Haut fest, wodurch der Haut dringend benötigter Sauerstoff von außen zugeführt wird.
Größere Sprudelblasen erzeugen eine Klopfschwingung, die sich ungehindert auf den Körper überträgt und so bis in die tiefsten Gewebeschichten wirkt. Dadurch wird die Durchblutung massiv gesteigert und bei regelmäßiger Nutzung Schlackenstoffe an alten Entzündungsherden eliminiert und Dellen und Wellen bei Cellulite gemindert.
Beinhaltet:
-16 Düsen in 4 Reihen mit Edelstalblenden
- Gebläse (230V, 900W)
Achtung: Rohrschleife min. 30 cm über dem Wasserspiegel muss bauseits erstellt werden!
Dekor-Fliesen
aus Ezarri Glasmosaik, werkseitig angebracht und verfugt
Oberhalb der Rollladenauflagekante, Höhe: 21 cm
Edelstahl Auf-/Unterputzdose für Touch-Display
(Bediendisplay) aus Edelstahl V2A, t=1,5mm,
230x170x50mm, mit zwei Aussparungen (Sensor und
Bedienfeld vorne), Ecken verschweißt und verschliffen.
230x170x50mm, mit zwei Aussparungen (Sensor und
Bedienfeld vorne), Ecken verschweißt und verschliffen.
Insulation
sprayed PU foam insulation
Equipment package
incl. preinstalled equipment package consisting of
· 1 skimmer, incl. filter cartridge and skimmer basket
· 1 inlet jet 105, R 1 ½"" 4 x 8 mm, V4A
· 1 winter plug for inlet jet 105 (delivered separately)
· 1 safety overflow fitting WP 133
· 1 underwater light LED warm white
· 1 transformer 100 VA and 1 deck box (delivered separately)
· 1 skimmer, incl. filter cartridge and skimmer basket
· 1 inlet jet 105, R 1 ½"" 4 x 8 mm, V4A
· 1 winter plug for inlet jet 105 (delivered separately)
· 1 safety overflow fitting WP 133
· 1 underwater light LED warm white
· 1 transformer 100 VA and 1 deck box (delivered separately)
Aufpreis Sandfiltersystem
inkl. Wandeinbau-Skimmer mit Edelstahlblende, Sicherheitsüberlauf und Edelstahl Vorfilterkorb
Bestehend aus:
1. Sandfilterkessel aus GFK D400
- mit seitlichen 6 Wege Ventil
- mit Filtersand
- Serviceöffnung oben DN220
- Betriebsdruck: max. 2,5 bar.
- Betriebstemparatur: max. 40°C
2. Wandeinbau-Skimmer mit Edelstahlblende
- Durchfluss / Qmax.: 6m³/h
3. Seitliche Wand Ansaugung
Hierdurch entfallen die Kartuschen Filter im Becken.
Für den oberirdischen Einbau zu verwenden.
*Nicht in Verbindung mit einer Technikbox möglich*
1. Sandfilterkessel aus GFK D400
- mit seitlichen 6 Wege Ventil
- mit Filtersand
- Serviceöffnung oben DN220
- Betriebsdruck: max. 2,5 bar.
- Betriebstemparatur: max. 40°C
2. Wandeinbau-Skimmer mit Edelstahlblende
- Durchfluss / Qmax.: 6m³/h
3. Seitliche Wand Ansaugung
Hierdurch entfallen die Kartuschen Filter im Becken.
Für den oberirdischen Einbau zu verwenden.
*Nicht in Verbindung mit einer Technikbox möglich*
surface care set
For the ideal treatment of the pool surface
Consisting of:
1 each of Pool Finish, Gel Edge Cleaner, Antigilb,
stainless steel polish, gloves, microfibre cloth polishing cloth, polishing set, sponge, care instructions for swimming pools (Technical Info SB 9)
4 x each 1000-, 2000-grit wet sandpaper and 800-grit sandpaper
Consisting of:
1 each of Pool Finish, Gel Edge Cleaner, Antigilb,
stainless steel polish, gloves, microfibre cloth polishing cloth, polishing set, sponge, care instructions for swimming pools (Technical Info SB 9)
4 x each 1000-, 2000-grit wet sandpaper and 800-grit sandpaper
water care set HTH
consisting of:
1 x Lovibond pool tester
1 x HTH pH-Plus 5 kg
1 x HTH Briquettes 7 g, 2.5 kg inorganic UN-1748,
Calcium hypochlorite, mixture, dry, 5.1, III, (E),
1 x HTH - pH Minus 5 kg
1 x HTH - Alkanal 5 kg
1 x Chlorine doser "Swim"
1 x Lovibond pool tester
1 x HTH pH-Plus 5 kg
1 x HTH Briquettes 7 g, 2.5 kg inorganic UN-1748,
Calcium hypochlorite, mixture, dry, 5.1, III, (E),
1 x HTH - pH Minus 5 kg
1 x HTH - Alkanal 5 kg
1 x Chlorine doser "Swim"
Heat pump HKR 6 kW
For the heating of your C-SIDE
Dimensions: 790 x 33 0x 580 mm
Weight: approx. 36 kg
Hydraulic connection adhesive screw connection d 50
Performance data:
Heat output A 15°/W 26°= 4,25kW
Heating capacity A 26°/W 26° = 6 kW
Cooling capacity approx. 4kW
Power consumption approx. 1.04 kW
Current consumption nominal 5A, fuse 16A C (slow blow)
Water flow rate > 2,3m³
Pressure loss heat exchanger kPa=2,4
Volume level in 10/1 mtr. approx. 38/50 dB(A)
Functionality starting at an outdoor temperature of 10 degrees.
Weight: approx. 36 kg
Hydraulic connection adhesive screw connection d 50
Performance data:
Heat output A 15°/W 26°= 4,25kW
Heating capacity A 26°/W 26° = 6 kW
Cooling capacity approx. 4kW
Power consumption approx. 1.04 kW
Current consumption nominal 5A, fuse 16A C (slow blow)
Water flow rate > 2,3m³
Pressure loss heat exchanger kPa=2,4
Volume level in 10/1 mtr. approx. 38/50 dB(A)
Functionality starting at an outdoor temperature of 10 degrees.
4 x vertical inlets
- installed in the entry area
- including 4 B141x winter plugs, 28/35 x 35 mm
- including 4 B141x winter plugs, 28/35 x 35 mm
Spa-Massage-Pak
2 x Turbojet-Slimline massage-nozzles for the lower back
4 x Microjet-Slimline massage-nozzles for neck and shoulders
2 x suction fittings, polished
1 x pneumatic switch with 5 m PN hose
1 x jet pump 230 V with PN switch box
(pump is delivered either lose or installed in the optional technical shaft)
Note: without PN switch in combination with technical package with Spa Touch display
4 x Microjet-Slimline massage-nozzles for neck and shoulders
2 x suction fittings, polished
1 x pneumatic switch with 5 m PN hose
1 x jet pump 230 V with PN switch box
(pump is delivered either lose or installed in the optional technical shaft)
Note: without PN switch in combination with technical package with Spa Touch display
Aqua Fun 4.0
4-jet flow & massage system (second technique shaft required)
The four jet nozzles of the Aqua-Fun 4.0 bring a strong current into the water. Furthermore, individual body parts can be massaged selectively.
consisting of:
· 4 Turbojet-Slimline massage-nozzles
· Jet pump 2,6 kW / 400V
· 1 pneumatic switch with 10 m PN hose
· PN switch box 400 V with contactor up to 2 kW ( 4 - 6A )
· 2 suction fittings polished
ATTENTION: The jet pump must always be installed below the water level. Please also note that you need an additional technique shaft for this pump.
consisting of:
· 4 Turbojet-Slimline massage-nozzles
· Jet pump 2,6 kW / 400V
· 1 pneumatic switch with 10 m PN hose
· PN switch box 400 V with contactor up to 2 kW ( 4 - 6A )
· 2 suction fittings polished
ATTENTION: The jet pump must always be installed below the water level. Please also note that you need an additional technique shaft for this pump.
Cascade "Maine"
Cascade "Mini V4A" consisting of:
1 x stainless steel cascade Mini V4A
1 x 1 jet pump 1,0 kW 230 V with PN switch box
1 x pneumatic switch with 5 m PN hose
2 x suction fittings
(pump is delivered either lose or installed in the optional technique shaft)
Note: without PN switch in combination with technical package with Spa Touch display
1 x stainless steel cascade Mini V4A
1 x 1 jet pump 1,0 kW 230 V with PN switch box
1 x pneumatic switch with 5 m PN hose
2 x suction fittings
(pump is delivered either lose or installed in the optional technique shaft)
Note: without PN switch in combination with technical package with Spa Touch display
Cascade "Cube"
V4A stainless steel cascade with push button in the pool
1 x cascade "Cube" (delivered separately)
1 x pneumatic switch 107/1 V4A (mounted) with 10 m PN hose and 10 m protective hose (delivered separately)
1 x jet pump with PN switch box
2 x suction fittings with stainless steel cover (mounted)
Note: without PN switch in combination with technical package with Spa Touch display
1 x pneumatic switch 107/1 V4A (mounted) with 10 m PN hose and 10 m protective hose (delivered separately)
1 x jet pump with PN switch box
2 x suction fittings with stainless steel cover (mounted)
Note: without PN switch in combination with technical package with Spa Touch display
Self-supporting construction
Additional underwater light LED warm white
1 x underwater light LED warm white (HT), transformer 100 VA and second deck box (KU)
Technical package for half-year use
Technical equipment with filter pump and bypass for a heat pump
This technical package can be used from spring to autumn. The pool is heated by an optional heat pump. When the outside temperature is above 10°C, the water can be heated up to 28°C.
The distance between pool and equipment should not exceed 5 m. Technical package can also be installed above water level.
Technical equipment mounted on a pallet consisting of:
· Self-priming filter pump 0.75 kW-230 V
· Check valve for filter pump
· Bypass for an optional heat pump
· Filter pump control mounted on inspection platform
· Connected load: 1 x 16 Ampere - 230 V
· Size 120 cm x 80 cm (length x width)
The distance between pool and equipment should not exceed 5 m. Technical package can also be installed above water level.
Technical equipment mounted on a pallet consisting of:
· Self-priming filter pump 0.75 kW-230 V
· Check valve for filter pump
· Bypass for an optional heat pump
· Filter pump control mounted on inspection platform
· Connected load: 1 x 16 Ampere - 230 V
· Size 120 cm x 80 cm (length x width)
Technical package with Spatouch-display
with frost protection, suitable for winter use
Technical equipment designed for automatic year-round use. The pool is heated by the electric heater. The distance between pool and equipment should not exceed 5 m.
Technical equipment mounted on a pallet consisting of:
· Self-priming filter pump 0.75 kW-230 V
· Pool-Control with Spatouch-display and temperature control and remote control (Spa touch-display and IR-receiver are delivered separately)
· electric heaters 230 V, 1 x 3 kW / 1 x 2 kW
· connected load: 2 x 16 Ampere
Note:
max. water temperature: 32°C for colours papyrus, silver grey and granicite stonegrey
max. water temperature: 38°C for mosaic tiled pools
Technical equipment mounted on a pallet consisting of:
· Self-priming filter pump 0.75 kW-230 V
· Pool-Control with Spatouch-display and temperature control and remote control (Spa touch-display and IR-receiver are delivered separately)
· electric heaters 230 V, 1 x 3 kW / 1 x 2 kW
· connected load: 2 x 16 Ampere
Note:
max. water temperature: 32°C for colours papyrus, silver grey and granicite stonegrey
max. water temperature: 38°C for mosaic tiled pools
Terminal for Spatouch display
stainless steel, ground surface
height: 1.000 mm
CSide Pooldeck (without cladding)
Kit consisting of:
Complete aluminium system incl. drainage level,
stainless steel roller with double ball bearing,
rails to be laid on or milled in the floor,
cover angle with brush seal, plug-in connector and installation material
Payload 1.8 kN/m²
Snow load 1.5 kN/m²
Assembly on site, assembly material is supplied
Delivery with the pool
Complete aluminium system incl. drainage level,
stainless steel roller with double ball bearing,
rails to be laid on or milled in the floor,
cover angle with brush seal, plug-in connector and installation material
Payload 1.8 kN/m²
Snow load 1.5 kN/m²
Assembly on site, assembly material is supplied
Delivery with the pool
CSide Pooldeck insulation
XPS insulation panels, incl. fixing brackets
Surcharge for Pooldeck to be covered by stones (stones not inlcuded)
CSide pool deck drive
With remote control
Piping material
for connecting the pool and technical shaft or heat pump
25m flexible hose, 50 mm
4 x reduction, 90°, 50 f/m
4 x elbow, 90° 2 x socket, 50 x 50 f/m
1 x Tangit cleaner 125 ml
1 x Griffon PVC glue WDF-05
4 x reduction, 90°, 50 f/m
4 x elbow, 90° 2 x socket, 50 x 50 f/m
1 x Tangit cleaner 125 ml
1 x Griffon PVC glue WDF-05
Spare cartridge
Spare cartridge for cartridge filter
Above ground electrical slatted cover
anthracite
Above ground electrical slatted cover, incl. sitch box ad key switch.
Slats not included
Slats not included
Aufpreis Oberflur-Sitzbankabdeckung
anthracite
Nur in Verbindung mit CSide Oberflurabdeckung
*Nicht nachträglich erhältlich*
*Nicht nachträglich erhältlich*
Technique cabinet
colour: anthracite
external dimensions incl. cover: ca. 1,92 m x 1,00 m x 1,10 m
internal dimensions: ca: 1,75 m x 0,85 m x 0,95 m
required space to open the doors: approx. 1,00 m each
weight: ca. 75 kg
Double wing door and removable cover
Frost protected - suitable for all-year use
internal dimensions: ca: 1,75 m x 0,85 m x 0,95 m
required space to open the doors: approx. 1,00 m each
weight: ca. 75 kg
Double wing door and removable cover
Frost protected - suitable for all-year use
Technique shaft XL
incl. cover 1064 x 726 x 650 mm
Technique shaft XL
incl. cover 1064 x 726 x 650 mm
technical package, installed in technique shaft, consisting of:
- technique shaft XL
incl. inspection platform, shaft drain and cable bushing
(article only available in connection with a technical package)
Note:
Technique shafts must ALWAYS be installed below water level.
Please note that the technology mounted in the shaft ALWAYS needs to be installed below the water level.
incl. cover 1064 x 726 x 650 mm
technical package, installed in technique shaft, consisting of:
- technique shaft XL
incl. inspection platform, shaft drain and cable bushing
(article only available in connection with a technical package)
Note:
Technique shafts must ALWAYS be installed below water level.
Please note that the technology mounted in the shaft ALWAYS needs to be installed below the water level.
Technique shaft XXL, incl. preparation for dosing system (dosing system not included)
incl. cover (1600 x 900 x 670 mm)
technical package, installed in technique shaft, consisting of:
- technique shaft XXL incl. inspection platform, shaft drain and cable bushing
(article only available in connection with a technical package)
Note:
Technique shafts must ALWAYS be installed below water level.
- technique shaft XXL incl. inspection platform, shaft drain and cable bushing
(article only available in connection with a technical package)
Note:
Technique shafts must ALWAYS be installed below water level.
Surcharge for electric heater 9 kW
total capacity: 3 kW + 9 kW
Upgrade for the technical package with Spatouch-display with a stronger electric heater, that allows to heat up the water more quickly.
Preinstalled on the technical package
Connected load: 1 x 16 Ampere - 230 V, 1 x 16 Ampere - 400 V
An insulating pool cover is required to heat up the pool efficiently.
Preinstalled on the technical package
Connected load: 1 x 16 Ampere - 230 V, 1 x 16 Ampere - 400 V
An insulating pool cover is required to heat up the pool efficiently.
Roller cover
Safety cover with roll-up gear
· incl. hand crank and drive pin.
· colour: grey ( RAL 7037 )
· colour: grey ( RAL 7037 )
Winter debris cover
Woven net to protect against foliage and coarse contaminants
Material: Polyester fabric
The cover protects against coarse impurities
Mounting instructions:
The cover is supplied with a double stitched wraparound. Eyelets are inserted at the edge at a distance of 50cm. The net cover is secured in retractable stainless steel floor anchors by means of elastic bands.
The cover protects against coarse impurities
Mounting instructions:
The cover is supplied with a double stitched wraparound. Eyelets are inserted at the edge at a distance of 50cm. The net cover is secured in retractable stainless steel floor anchors by means of elastic bands.
Insulating floating cover, 5 mm foam
colour: grey
rectangular
Hardtop cover
4 parts,made of RivieraTex, RivieraTex is a 100% dyed polyester fabric, PU-coated, water-repellent, incl. protective cover against pollution and rain
Coping stones granite, grey
for CS 37
Coping stones with overhanging nose
Dimensions: 60x60x6/3, mottled surface
Dimensions: 60x60x6/3, mottled surface
Manual vacuum cleaner
PVC blue
Remove the dirt from your CSIDE with light manual pumping movements. With removable, very fine filter, which can be easily rinsed out.
Total length: 148 cm
Colour: PVC-blue
Suction width: 8 cm
Total length: 148 cm
Colour: PVC-blue
Suction width: 8 cm
Bottom outlet, elbow 90°
(only required if you want to empty the basin completel)
· Red brass 11/2" f
Suction fitting d130
(only needed additionally if you want to connect a sand filter)
· straight wall duct
· polished stainless steel
· hair safe according to DIN 13451
· Qmax = 8.1 m³/h
· polished stainless steel
· hair safe according to DIN 13451
· Qmax = 8.1 m³/h
Inlet fitting 1 1/2"
red brass wth plastic face plate, black or white
Surcharge for 1x LED RGB light
Coloured LED light
1 x underwater light LED RGB (HT) with DMX control box and remote control
Surcharge for 2 x LED RGB light
Coloured LED light
2 x underwater light LED RGB (HT) with DMX control box and remote control and second deck box (KU)
Hardtop cover
4 parts,made of RivieraTex, RivieraTex is a 100% dyed polyester fabric, PU-coated, water-repellent, incl. protective cover against pollution and rain
Hardtop cover
4 parts,made of RivieraTex, RivieraTex is a 100% dyed polyester fabric, PU-coated, water-repellent, incl. protective cover against pollution and rain
Roller shutter slats, PVC
PVC grey
for being used with the Poolbox
Roller shutter slats, polycarbonate
polycarbonate solar version
for being used with the Poolbox
Surcharge for fixed date (day) delivery
Delivery to the dealer
Surcharge for delivery by a curtainsider
crane unloading on site
Forwarding truck is to be opened at the top. This allows a crane to lift the pool out of the truck.
Choose stairs:
CSIDE mini pools
<p><strong>Our versatile classics</strong></p>
Width
2.1 m
2.1 m
CSIDE RS Underfloor
<p><strong>Our new mini pool models with roller shutter shaft</strong></p>
Width
2.1 m
2.1 m
* incl. 20% VAT All illustrations include the equipment package and optional accessories. In the interest of technical progress, we reserve the right to make changes and improvements in production without prior notice. All offers are subject to change and non-binding. Prices without guarantee. The author expressly reserves the right to change, supplement or delete parts of the pages or the entire offer without separate announcement or to discontinue publication temporarily or permanently. Liability claims against the author, which refer to material or non-material damage, and which may be caused by the usage or non-usage of the information provided or, respectively, by the usage of any incorrect or incomplete information, are generally excluded. This disclaimer is to be regarded as part of the internet publication which you were referred from. If sections or individual terms of this statement are not legal or correct, the content or validity of the other parts remain uninfluenced by this fact.
Detail Titel
Detail Text
